VISCOFLOOR MAXI S1 WHITE is a white powder adhesive composed of hydraulic binders, specific additives, silica sand, and selected aggregates with a particle size of up to 1 mm. The product is intended for both indoor and outdoor use: balconies, terraces, basements, heated floors, cured concrete, and existing substrates. Extended open time and zero vertical slip ensure the installation of any type of tile and natural stone, provided they are moisture-resistant.
VISCOFLOOR MAXI S1 WHITE, thanks to its high adhesive properties and high resin content, is suitable for installing ceramic materials—including those of varying thicknesses—such as stoneware, clinker, single-fired tiles, ceramic tiles, and Tuscan terracotta, in layers up to 15 mm thick. VISCOFLOOR MAXI S1 WHITE can be used on cementitious plasters, cementitious substrates, concrete, and traditional EURO MASS 50 screeds from the EUROKOLL product line.
Screeds made of anhydrite or on gypsum-based plasters must be pre-treated with PRIMER GES. Substrates must be mechanically sound, sufficiently dry, free of loose particles,
and free of grease, oil, paint, wax, etc.
Mix the contents of one bag (25 kg) with approximately 7–7.5 liters of clean water, preferably using a mechanical mixer, until a homogeneous, lump-free mortar is obtained. Let the mixture rest for about 5 minutes, then remix it before application.
